High-efficiency, JPJ homologation-ready electric two-wheelers tailored for urban commuting, commercial fleets, and high-performance applications across Malaysia.
Why leading fleet operations, importers, and brand distributors across Malaysia choose our electric moped manufacturing ecosystem.
Equipped with specialized phase-change aluminum cooling sinks and high-heat resistant BMS chips designed to withstand Malaysia’s perpetual high humidity and ambient temperatures exceeding 38°C.
Ranging from 1100W daily commuters to 24,500W peak performance supermotos, delivering instant torque to navigate steep terrains in Genting Highlands and urban stop-and-go traffic smoothly.
Critical electrical modules, controller boxes, and lithium-ion packs feature IP67/IP68 sealed encapsulation, preventing water damage during severe flash monsoon urban flooding.
Flexible manufacturing solutions allowing Malaysian assembly plants to import knocked-down kits, reducing customs duties under ASEAN Free Trade Area (AFTA) provisions.
Integrated CAN-bus protocols with built-in GPS tracking, remote battery diagnostics, anti-theft geofencing, and over-the-air (OTA) firmware updates tailored for commercial delivery fleets.
Full engineering documentation, UN R136 battery safety testing, UN R62 steering locking standards, and EMC certification assistance to accelerate Vehicle Type Approval (VTA).
Selecting the optimal power, battery chemistry, and chassis frame architecture for commercial and consumer deployment in Peninsular and East Malaysia.
| Series Model Type | Motor Rating | Battery Config | Max Speed | Real-World Range | Ideal Application Scenario | Supply Format |
|---|---|---|---|---|---|---|
| Urban Daily Moped (CG Series) | 1100W - 1300W BLDC Hub | 60V / 72V Lead/Lithium | 60 km/h | 70 - 90 km | Suburban Commuting & Campus Micro-mobility | CBU / SKD |
| Commercial Courier Fleet | 3000W Continuous Hub | 72V 50Ah LiFePO4 (Swappable) | 85 km/h | 100 - 120 km | Last-Mile Logistics (GrabFood, Foodpanda) | CKD / OEM |
| Heavy-Duty Street Legal | 5000W - 8000W Mid-Drive | 72V 60Ah CATL NMC Cell | 105 - 120 km/h | 130 - 150 km | Inter-city Express Commuting (Klang Valley) | CBU / SKD |
| Off-Road & Extreme Trail | 21kW - 24.5kW Peak Mid-Motor | 74V 60Ah High-Discharge | 110 km/h | 100 km (Trail) | Eco-Tourism Resorts & Outdoor Patrols | CBU Bulk |
The Malaysian electric two-wheeler landscape is currently undergoing a structural transformation. Driven by the National Energy Transition Roadmap (NETR), the Low Carbon Mobility Blueprint (LCMB) 2021-2030, and aggressive government incentives such as the MARiiCas (Electric Motorcycle Incentive Scheme), Malaysia is actively transitioning from internal combustion engine (ICE) kapcai motorcycles toward zero-emission electric mopeds and high-performance electric motorcycles.
With over 15 million registered motorcycles on Malaysian roads—representing roughly 46% of total national vehicular traffic—the market demand for reliable, cost-effective, and climate-resilient electric mopeds has reached an unprecedented high. For importers, OEM brand owners, local assemblers, and fleet operators, securing an established Electric Moped Motorcycle Manufacturer & Supplier capable of providing tropicalized hardware, stable supply chains, and CKD/SKD assembly kits is paramount to achieving market dominance.
When sourcing electric motorcycles for the Malaysian market, standard generic electric scooters often fail due to severe environmental and operational stressors. Professional B2B buyers must evaluate four core technical pillars:
Ambient temperatures across Kuala Lumpur, Penang, and Johor Bahru consistently range between 28°C and 36°C, with pavement temperatures exceeding 50°C during peak noon hours. Under these conditions:
Flash flooding is a recurring seasonal reality in low-lying Malaysian urban areas. Electric moped manufacturers supplying the region must ensure:
With the rapid growth of platforms like GrabFood, Foodpanda, Lalamove, and Shopee Express, urban delivery riders cover between 120 km and 200 km daily. Transitioning to electric mopeds cuts operational fuel costs by up to 75%. Our 3000W fast-charging and dual-battery swappable moped models allow riders to exchange depleted packs in under 30 seconds at localized swap stations, eliminating charging downtime entirely.
In educational hubs such as Universiti Malaya (UM), Universiti Putra Malaysia (UPM), and suburban townships like Petaling Jaya, Subang Jaya, and Cyberjaya, lightweight 1100W–2000W electric mopeds provide a safe, affordable, and zero-maintenance alternative to traditional gas scooters. Low center-of-gravity chassis designs ensure effortless maneuverability for riders of all skill levels.
Island destinations and luxury eco-resorts are increasingly mandating silent, zero-emission transportation. Retro classic electric mopeds and rugged off-road electric motorcycles (such as the 24.5kW trail series) provide tourists with immersive exploration capabilities without disturbing wildlife or violating local environmental noise regulations.
Navigating the regulatory landscape in Malaysia requires strict adherence to institutional standards:
As a premier Electric Moped Motorcycle Manufacturer & Supplier, we offer full-spectrum Original Equipment Manufacturing (OEM) and Original Design Manufacturing (ODM) services designed to help partners build strong localized brand equity:
Answers to common commercial, engineering, and regulatory questions from Malaysian importers, fleet operators, and distributors.
Yes. We provide complete technical documentation, UN R136 battery safety reports, and structural drawings required by local partners to register models under the MARii (Malaysian Automotive, Robotics & IoT Institute) incentive portal.
CBU (Completely Built Up) units arrive 100% assembled, ideal for rapid market testing. SKD (Semi Knocked Down) units have key assemblies pre-built, reducing shipping volume. CKD (Completely Knocked Down) provides individual components for local assembly lines, maximizing tax benefits in Malaysia.
Our lithium battery packs are sealed within extruded aluminum casings rated to IP67. Connectors use gold-plated pin contacts with silicone gaskets, ensuring absolute moisture resistance during monsoon rainfall.
We provide a 2-year warranty on core components (Frame, Motor, Controller, and Battery Pack). Additionally, we ship a 3% spare parts package (switches, brake pads, relays, tires) free of charge with every container shipment.
Absolutely. Our commercial moped series features standardized dual-pack quick-release lithium batteries compatible with automated smart battery swapping cabinets and centralized charging stations.
Standard OEM production takes 25 to 30 days following sample sign-off. Maritime transit from our manufacturing plant to Port Klang or Penang Port generally requires an additional 7 to 12 days.
Accelerate your business with industry-leading EV engineering, direct factory pricing, and full JPJ/SIRIM compliance support. Contact our technical sales team today for wholesale price lists, CKD specs, and custom branding proposals.
Get a Quote